CTD TruCut Gloss Powered by Turtle Wax 7oz

Grab the CtD TruCut Gloss Powered by Turtle Wax – the ultimate solution for enhancing your bowling ball's performance and maintaining a superior gloss finish. Engineered with cutting-edge technology, this semi-permanent gloss product is designed to revolutionize your bowling experience. Versatility at Your Fingertips: Achieve a reactive-to-urethane ball reaction effortlessly. Transform your reactive bowling ball into a high-performing urethane-like powerhouse. The gloss drastically alters ball reaction, providing increased skid through the front and middle portions of the lane while significantly decreasing backend performance. Transform your reactive bowling ball into a high-performing urethane-like powerhouse. The gloss drastically alters ball reaction, providing increased skid through the front and middle portions of the lane while significantly decreasing backend performance. Experience the gloss's superior performance for 6 to 9 games, depending on the environment. Easy to apply as a liquid, TruCut Gloss forms a durable polymer layer on the surface of your bowling ball. This layer not only resists dirt and scuff marks but also imparts a slick feel to the touch, requiring two hands to pick up the ball. When it's time for a change, simply use TruCut Sanding Pads to remove the gloss, leaving your ball ready for the next application.

7 ounce bottle
Semi permanent gloss product that has the ability to stop or slow oil absorption
Can change ball reaction drastically even making your ball perform just like urethane
The performance is designed to last 6 to 9 games depending on the environment
The performance can be completely removed by using TruCut Sanding Pads
Easy to use liquid product that provides a durable polymer layer on the surface

Manufacturer's Instructions:
-THIS PRODUCT IS NOT USBC APPROVED (USBC doesn't approve products like TruCut Gloss They have looked at it and have stated they do not have an issue with it. You CANNOT apply this product during competition, only before and after.)
-This is not a permanent fix for your bowling ball.

How to Use to create a urethane performance from any reactive bowling ball:
Using the CtD Ball Spinner:
1. Sand the reactive bowling ball to 500 grit on 4 sides using TruCut Sanding Pads. Watch this video on how to sand your bowling ball on a ball spinner Note: Using non TruCut sanding pads may result in a non desired result and inconsistent performance. This is highly not recommended.
2. Shake the bottle well before using the TruCut Gloss.
3. Apply a half dollar size amount to the Microfiber side of a CtD BAM Pad or CtD Power Pad.
4. Using a ball spinner on 4 sides of the bowling ball using an up and down motion for 20 seconds per side.  Each time you change sides apply an additional half dollar size amount of TruCut Gloss.  This ensures that multiple layers of protection are applied.
5. You will notice the ball will begin to feel slick to the touch. This is an indication that the product has been applied.  You MUST HOWEVER USE 2 HANDS to remove the ball from the spinner.
6. Wipe the ball dry with a clean CtD Power Pad or BAM Pad.
7. IMPORTANT: Do not use any other bowling ball cleaner on your ball to wipe the ball off other than CtD Life After Death. Using other products can reduce the effectiveness of the TruCut Gloss.
8. For maximum durability allow the ball to sit 30 mins before use.

By Hand:
Can be added to a 500 Grit TruCut surface to the bowling ball then you can apply TruCut Gloss using a CtD BAM Pad or CtD Power Pad by hand and let sit for 1 hour before use. It is recommended to use a spinner to ensure even coverage and to get the longest-lasting results.