Storm Summit Peak Bowling Ball - Goldenrod/Mint/Iridium

Extended 1 or 2 Year Warranty:

If your bowling ball becomes defective during the Manufacturer's 1 year warranty, you will be responsible for shipping of the ball back to us and shipping of the replacement ball back to you.

By adding the Extended Warranty, we will pay shipping both ways, even if it is still within the manufacturer's warranty period.

We will add to the manufacturer's warranty up to an additional year! No additional costs of any kind.
*Fast Turnaround
*We pay shipping both ways

Conditions:

    Must be purchased with ball at time of original order
    Must be a manufacturing defect, not normal wear and tear

THIS OFFER ONLY APPLICABLE IN THE LOWER 48 STATES

This custom option allows you to choose a different Abralon finish on your new ball. This will be done using our ball surface machines and professionally trained staff.

500 Grit Finish: Early Roll, Even Arc Reaction
800 Grit Finish: Same as above with a little longer length.
1000 Grit Finish: This is a great surface for a strong roll in the midlane with good backend reaction.
2000 Grit Finish: Will roll longer down the lane than 1000 with more backend reaction.
3000 Grit Finish: Slightly longer than 2000.
4000 Grit Finish: The ball will actually look like it has a light polish on it. This still gives the ball traction in oil with the strongest backend reaction for a matte finish.

High Gloss Polish: We will polish the ball with whatever the factory box finish is. This will give the ball added length and more backend reaction
1000 Grit then High Gloss Polish: A good base of sanding with polish on top. Will still cut through the oil, but with a stronger backed reaction than 1000 Grit Finish.
2000 Grit then High Gloss Polish: Longer than 1000 with a strong backend reaction.
3000 Grit then High Gloss Polish: Longer then 2000 with a stronger backend reaction.
4000 Grit then High Gloss Polish: This will give the bowling ball the absolute longest reaction and the most skid so the ball conserves the most energy for the backend part of the lane.

Drilling Protection Plan:

If your new ball cracks when it's drilled by a pro shop, we will replace your ball free of charge! Manufacturers' warranties do not cover for cracking during drilling and drillers are not held responsible for their mistakes or defects in the ball.

Ball must be drilled within 14 days of receipt (If this is a gift and will not be drilled within this timeframe, simply send us an email and we will give you an extension)
Protection must be purchased before ball is drilled
We pay freight back to you
Protection may not be applied to international orders
Bridge must be at least 1/4" wide between the fingers
all may not be plugged in any way
Bridge cannot be weakened by holes that join at the bottom
Defect may not be caused from lane damage, ball return systems and/or gutters

Pin Distance:

This is the distance between the pin (small circle on ball that marks the center of the weight block) and the Center of Gravity (CG). 

Here are some guidelines to choose your pin distance so your ball driller can lay your ball out based on your desired reaction of the bowling ball.

No Preference: Choose this if the pin position does not matter to you. (FYI: Most good ball drillers can make just about anything work) If you consider yourself a beginner or a bowler that just does a normal label drilling, go ahead and choose this option)

1-2 Inches: Great selection for pin down drillings to achieve and early and smooth roll

2-3 Inches: Great selection for just about any layout. The ball driller can achieve many different desired ball reactions with this pin distance.

3-4 pin: Great selection for layouts to get the ball to go longer down the lane. This is also good for bowlers that have long spans.

4-5 pin: This is an extreme pin and is hard to come by. If you choose this distance, your ball shipment may be delayed or refunded due to hard to come by balls with 4-5 inch pins.

Top weight is the amount of weight difference from the top of the bowling ball (CG) and the bottom of the ball.


No Preference: We will ship what is available and will normally be between 2 to 4 ounces.

2 to 3 Ounces: Is for standard drilling techniques. It is also used for advanced drillings where moving the cg further off center of span creates a stronger drilling. 

3 to 4 Ounces: This top weight is good if you want the ball to push more (go farther down the lane) while adding backend motion.

We always look for ways to give our customers more options for their purchases from us. Below is an explanation of our gift wrapping service. If there is no drop down options for our gift wrapping service, that means that option is not available for that particular item.

Include a packing slip so the recipient knows who it's from.
Keep the gift a surprise by concealing items that ship in only the manufacturer's original box.
We will gift wrap the item based on your selection. The item(s) will then be placed in a protective box for shipping.

Here are examples of the sizes of packages and which gift wrap service these fall under.

Small Items: Accessories, Apparel, Shoes
Medium Items: Bowling Balls, Single Bowling Bags
Large Items: Double Ball Bowling Bags, Single and Double Roller Bags
X-Large Items: 3 and 4 ball roller bags.

If there is no drop down options for our gift wrapping service, that means that option is not available for that particular item.

Balls are drilled on our Computerized Mill/Drill System. Our Pro Shop Staff has over 35 years of combined experience drilling bowling balls. Our staff also includes a PBA Member & Champion currently on Brunswick's PBA Staff. This pre-sized drilling option (XS thru XL) is recommended for recreational bowlers who prefer to use a conventional grip bowling ball. Drilling will take an extra 1-2 days to ship in most cases.


PROFESSIONAL DRILLING SERVICE: (Includes Finger & Thumb Inserts)
1. My specs are already on file with Bowlerstore.com
2. Email me a pre paid label to take specs off current bowling ball
3. I will fax or email my specs to Bowlerstore.com
Fax:1-877-300-2695 Email: [email protected]

Choose this if you would like a name, nickname, number, etc. engraved on the bowling ball. Maximum of 10 letters/numbers including spaces. IF YOU GO OVER THE 10, YOUR BALL WILL NOT BE ENGRAVED. 

After you choose to engraving option, simply type in what you would like engraved in the text box below. 

The color of the engraving will be the same color (or very close) the engraving color of the ball logo. Example: If the ball name is T-Zone and the lettering is yellow, the engraving will also be yellow. If you prefer a different engraving color, simply type the color of the engraving in the item notes section in the SHOPPING CART.

Engraved bowling balls CANNOT be returned. Engraving will take an extra 1-2 days to ship in most cases.

Enter what you want engraved on the bowling ball here. Maximum of 10 letters/numbers including spaces. IF YOU GO OVER THE 10, YOUR BALL WILL NOT BE ENGRAVED. IF YOU NEED MORE THAN 10, THE COST IS DOUBLE FOR THE ENGRAVING AND YOU MUST CALL US AT 877-300-2695 OPTION #1 TO PAY FOR THE ADDITIONAL ENGRAVING.